Monday, June 10, 2019

June 2019 Safety Topic of the Month: Attachments

This month, I will focus on attachments for all kinds of equipment.

As all attachments are unique, each one has specific safety and maintenance points that should be considered before each use. Always consult your owners manual for proper operating practices, pre use checks, etc. or consult your dealer for more information and resources for your specific equipment.

Keeping the above in mind, I will cover the basics for any given piece of equipment:


  • Visual inspection - always the starting point for a safety/maintenance program. Give a thorough check over the entire unit - this is where most issues are found. Make sure any fluid reservoirs are topped off with the correct fluid. 
  •  If the unit is propelled by hydraulic power, check for leaks. Check quick-disconnect fittings for proper connection (with pressure relieved). Check cylinder connecting pins for play and lubrication.
  • Belt driven - check belt tension and wear. Make sure the belt travel path is clear at all points.
  • Shaft driven - check shaft for excess play and lubrication. Make sure there are no obstructions in the travel path of the drive shaft.
  • Electronic controls - check the primary connection plugs for a tight and dry fit. If there is excess water (rain) buildup, create a drain path or move the connector if possible and resecure out of the way. Visually inspect attachment electrical components (that are visible)  for moisture and signs of overheating.
  • Check all pivots, joints, pulleys, etc. for wear, lubrication, etc.
  • Check stops, set bolts, etc. for tightness and proper adjustment.
  • Finally, start the machine and check the attachment functions - all should be in proper working order before use!
I saved the most important for last - make sure all guards are in place and functioning properly!!!

Feeling overwhelmed with everything that needs to be taken into consideration for attachments AND equipment? - never be afraid to reach out to a service provider (Hi!) - even for a one-time-show-me-how session!

(509) 381-2148
service@mobilemachineryservice.com

Thank you!
Tom Kassen

No comments:

Post a Comment